|
PE paint |
|
He yu chemical products code |
|
PE paint (finish) |
Light-Topcoat
|
Various types of furniture |
- Luster finish |
PE Primer Products
No. |
Product Name |
Supporting diluent |
Supporting the initiator (Whitewater) |
Supporting the promotion of (blue water) |
PE201 |
PE special-Primer |
PE water |
PE Whitewater |
PE-water |
PEXXXX |
PE Color Primer |
PE water |
PE Whitewater |
PE-water |
Note:XXXX: Color name or code 1, Features (1) of the paint primer for unsaturated polyester, solid content, fullness and high available after the construction of a thick coating, construction and high efficiency. The paint dry quickly, hardness, easily polished. Applied to particle board, furniture made of MDF, is also applicable to solid wood furniture and plywood stickers. (2) can enhance the paint finish hardness, reduce the amount Paint, a high-quality, low consumption, time-saving, low pollution of the excellent performance. (3) at room temperature, Touch for about 40 minutes that pressure for about two hours, grinding time to 24 hours. 2、Use (1) Construction of proportion:
|
Paint: thinner: initiator: the promotion of |
Standards |
100:30: 1.2: 1.0 |
Changes in the scope of |
100:20-40:1.0-2.5:0.7-2.0 |
Temperature in 30 ℃, relative humidity of 75 percent when using the standard ratio, with the temperature, relative humidity changes, ratio should be adjusted accordingly, the general decline in temperature, initiator increase, relative humidity increased, and promote increased dosage. (2) practical application may be accelerating agent, initiator joined in the paint, spraying the two groups in the former Duirujiaoyun to 1:1, can also promote the agent to join in the paint, will be required to use trigger Penhu of accession has been promoting the pre-blending and mixing paints to spray. (3) the standard ratio: Group A points: Paint: thinner: initiator = 50:15:1.2 Group B points: Paint: thinner: initiator = 50:15:1.0 (4) Group A-and B-contour mixed evenly, with just a Penhu suitable to filter in question after spraying Tu Face. General spraying two "10" words, the correct ratio, that contravene the table dry time of not more than 40 minutes, the error is larger, it is necessary to repeatedly check and adjust the ratio to normal. 3, note (1) and the initiator of the promotion must not be mixed directly, or else they would blast the fire, storage and transportation process, the promotion of dose and the initiator must separate two storage. (2) the construction of each jet End a Penhu, clean spray gun to use thinner, Penhu. (3) the mixture of paint (25 ℃) should be exhausted within about 20 minutes. (4) to be sprayed on the substrate to be effective closure and removal of the surface trace, such as wax. 4, packaging and storage 1kg, 4kg, 20kg (tinted primer 5 kg, 25kg), such as iron packaging, the ventilation in a cool dry storage. Since the production of three months from the date of durability. |
|