Diaoqi |
① Tu of the surface was not clean, and have other harmful substances. ② putty or thick bottom closed, not completely polished clean. ③ lower after sanding, story time interval is too long. ④ between the substrate and the coating is too smooth, coating adhesion is not strong. ⑤ wood moisture content is too high. ⑥ effect of the closure of wood not good enough, air temperature, suction temperature too much. ⑦ coating between the use of paint not matching. ⑧ bottom stem that is not coated surface, surface coating the surface tension, easily aroused at the end of paint loss. |
① was coated surface to be dealt with thoroughly. ② putty to be dealt with thoroughly. ③ layer after sanding should not place too long. ④ be appropriate substrate surface roughness. ⑤ wood drying, moisture content and moisture content of a local balance. ⑥ timber will be closed for a reasonable treatment. ⑦ not strong selection of paint solvents for surface coatings, supporting the use of attention to finish at the end. ⑧ coating dry before Tu surface. |